Descrizione del progetto
Set per infusione endovenosa Tipo di buretta
PVC Tube,PE Chamber
60drops/ml
Coordinates the disposable use of venous transfusion needles and injection needles, uses in the vein drop for the human body.
100pcs/carton
Panoramica:
Disposable burette type iv infusion set is a sterile, single-use medical device, applied in venous infusion in the clinic.
Product Accessories: Equipped with Spike, Air Filter, Flexible tubing, Y-injection set, Roller Clamp, Fluid Filter, and needle, etc.
Instructions For Use:
1. Close both roller clamps.
2. Open the air vent cap, remove the protector from the spike and insert the spike fully into the I.V. container.
3. Open top roller clamp and air vent cap, fill burette chamber to approximately 30ml, then close top roller clamp, squeeze flexible drip chamber until the fluid level reaches the half-full line in the drip chamber.
4. Open bottom roller clamp, expel air bubbles from the set, close clamp.
5. Open the top roller clamp and fill the burette chamber to the desired level. Close clamp.
6. Make venipuncture.
7. Open the bottom clamp and regulate flow by adjusting the roller.
8. Adding medication through the injection site.
Caratteristiche:
2. Può essere assemblato con sacche e flaconi per infusione;
3. Sterilizzato con gas E.O., non tossico e privo di pirogeni;
4. Punte dell'ago molto affilate, che provocano una leggera forza di puntura e riducono il dolore del paziente;
5. Tubo flessibile con lunghezza standard di 150 cm; 1,8 m, 2,0 m o lunghezza personalizzata.
6. Con un regolatore di flusso per controllare la portata del liquido medicinale.
7.Without needle (can be with the needle).
8.With “Y” injection port.
9.With a drug filter.
10.Luer lock or Luer slip connector.
Stoccaggio:
Conservare in un luogo fresco, asciutto e buio. Evitare la luce diretta del sole.
Attenzione:
1. Non utilizzare il dispositivo se la confezione è danneggiata.
2. Gettare il dispositivo dopo l'uso. Il dispositivo è destinato a essere utilizzato una sola volta.
3. Le aree di stoccaggio devono essere ben ventilate e prive di gas corrosivi.
4. Deve essere ben equipaggiato con strutture antincendio, antiratto, antiumidità e antiparassitario e non deve essere conservato a temperature estreme.
5. Non utilizzarlo se ha superato la data di scadenza.
Ottenete un preventivo accurato per i vostri prossimi progetti
Non importa se il vostro progetto è complicato o semplice, se si tratta di materiali di consumo medici o di laboratorio, ecc, otterrete un preventivo accurato entro 6 ore.